Specializing in the Model A Ford
| About Us | Contact Us | Restored Items | Used Parts | Tips & Tricks |
|
|
||||||
Specializing in the Model A Ford |
|||||||
|
SHOP SERVICES - PG 1 |
|||
SEE RESTORATION PAGES FOR ITEMS IN STOCK OR CONTACT FOR YOUR SPECIFIC REQUIREMENTS |
|||
 |
 |
 |
 |
TRANSMISSION REBUILDING |
|||
Complete dis-assembly, degrease, tumble and paint exterior component correct colors. Additional parts as required. |
|||
| Glass bead blast, inspect for cracks and proper fit all interior components. New bearings and seals if required. |
|||
 |
 |
 |
 |
SHIFT TOWER REBUILDING |
|||
| Complete dis-assembly, degrease, tumble and paint exterior component correct color. Weld and re-machine shifter forks. Weld and | |||
| re-contour ball on shifter lever.We can provide original or repro. shift levers in chrome or bright/butler Nickel. New detents & spring | |||
 |
 |
 |
 |
BELL HOUSING REBUILDING |
|||
| Dis-assembe, degrease, and paint exterior. Remove and replace both shafts. Remove and install new bushings and ream to size. |
|||
Clean, hone T/O brg. fork and clutch lever, install. Back counterface wishbone pivot bolt holes and install hardened sleeves. |
|||
 |
 |
 |
 |
PEDAL REBUILDING |
|||
Clean, glass bead blast pedals, check for straightness. Remove old bushing, replace and hone to size. Clutch pedal barrel bore is |
|||
welded and re-machined to the correct diameter. Old pads are cut off and replacement pads are aligned and welded in place. |
|||